Views: 2 Author: Site Editor Publish Time: 2022-12-29 Origin: Site
Hinge doors in daily use may encounter some problems, such as hinge door how to adjust the gap and hinge door can not close how to solve first hinge door to adjust the gap, the hinge above the screw to the right for rotation, the gap becomes smaller, and vice versa. Secondly, the hinged door can not be closed using a 5mm hexagonal wrench to loosen all the screws on the door and readjust the installation position.
Wooden door hinges also need to adjust the gap properly. Then the door of the hinges, how to adjust the gap?
1. During the adjustment time, you must rotate the screw above the hinge to the right. In the rotation process, you can find that the distance covered will gradually become smaller and vice versa. The screw will rotate to the left, and you can cover the distance of the door gradually become more extensive.
2. can be adjusted in this way to adjust the gap. In addition, if you want to adjust the depth of the door, then it is possible to use eccentric screws to adjust. I want to adjust the height. You can use the base of the hinge to adjust.
We have encountered the process of using a door that does not open or close the phenomenon. Most of these problems are due to the hinge problem. Then the hinged door can not be closed. How to solve this?
1. You can use a 5mm hexagonal wrench to loosen all the screws on the door.
2. Next, the door will be gently tugged outward so that the door and frame go up and down to make some space after closing the door from the inside to see if it can touch the door frame. If you hit the door frame, the distance between the two pages is too considerable, so push the door in a little. If you do not hit the door frame, but the latch can open and close smoothly, this position is more appropriate.
3. Next, the bolt will be fixed. First, the bolt near the door will be fixed, and then fix the other two bolts opposite the top and bottom.
After fixing the bolts of the three hinges near the door, close the door to check whether the position is appropriate. If appropriate, directly tighten the remaining six screws can be.
